A Peugeot Boxer 355 Professional L3H2 HDI Panel Van Reg. No.KS16YFM, first registered 30/6/2016, indicated 62,232 miles, MOT until 7/7/2021, ply lined, side door, minor scratches and bumps NB. This vehicle is held on finance and the outstanding monie s due to the finance company will be discharged from the sale realisation.

A Nissan NT400 Cabstar 35.14 LWB DCI Dropside Truck Reg. No.YX64WRZ, first registered 30/9/2014, indicated 77,391 miles, MOT until 20/5/2021, 15ft x 7ft flat, damage to nearside mirror indicator lense, minor scratches and bumps, oil service due.

A Cincinnati Series 2510 Mechanical Guillotine No. 10938, 10ft w, 3/8in MS capacity, 3 phase with power back stop and Sony NA30 Digital Readout.

A Pedrazzoli Troncatrice Brown 300 MRM Metalworking Cut Off Saw No.023343 (1996), 3 phase on steel stand.

A Quantity of Plastic Pipe and Tube.

A MACC NEW315 EDV Metalworking Cut Off Saw No.84605 (2008), 170kg, 3 phase on steel stand with roller feed conveyor, 6in x 60in.

A BT Hand Hydraulic Pallet Truck.

A Bulldog Hand Hydraulic Pallet Truck, 2500kg capacity.

A Crown Hand Hydraulic Pallet Truck.

A Hand Hydraulic Pallet Truck.

A Hand Hydraulic Pallet Truck.

2 Welded Steel Storage Racks: 1-160in w x 15in dp x 63in h, 1-Double Sided 120in w x 33in dp x 86in h.

A Kingsland 55XS Hydraulic Steelworker No.604593, 3 phase with 2 treadle controls and welded steel feed stand.

A Karl Muller HBS250 Horizontal Metalworking Bandsaw No.2000 (1996), 320mm capacity, 3 phase.

A Heavy Duty Roller Feed Conveyor, 12in x 96in.

A Kitchen and Wade 48in Radial Arm Drill No.8967, 3 phase with Cast Iron Slotted Box Table, 36in w x 21in dp x 26in h.

A Shorte Engineering 16LF Lockformer No.0794DB, 1.5mm capacity, 3 phase on mobile frame.

A Shorte Engineering Edger, 1.5mm capacity, 3 phase on mobile frame.

A Set of Manual Triple Bending Rolls, 20in x 1in on steel stand.

A Tecna 3405 70kVA Spot Welder No.09-514/89, 3 phase on mobile frame.

A Set of FJ Edwards Manual Triple Bending Rolls, 48in x 3in.

A Cast Iron Fly Press with tooling on steel stand 22in x 22in x 36in h.

A Pierce-All PERF-O-MATOR 3025A Hydraulic Punching and Notching Machine: 25 ton, 12 Station, 3 phase; Newall sapphire 2 axis Digital Readout; Treadle Control; 6 drawer Tool Chest and Tooling; Instruction Manual.

A Youngman Alloy Scaffold Tower with H-Frames, Boards, Cross Supports, Outriggers, Ladders, Legs, Wheels (44 pieces).

A Quantity of Assorted Grinding and Polishing Consumables including Cutting Discs, Polishing Wheels, Abrasive Pads, Spirobands, Abrasive Paper.

2-400w Floodlights (unused).

A Large Quantity of Assorted Fixings.

A Steel Framed Timber Top Work Bench, 72in x 36in x 33in h.

A Welded Steel Heavy Duty Cabinet, 600mm x 600mm x 1050mm h.

A Welded Steel Site Chest, 36in x 22in x 23in h.

7 Various Welders/Safety Masks.

Assorted Tools and Equipment including Shovels, Drain Clearing Set, Glass Clamps, Spirit Levels, Sealant Guns, Tool Belt, Saws, Hammers, Propane Torch, Dirt Devil, Tape Measures.

A Steel Framed Timber Top Work Bench, 72in x 36in x 34in h.

A Quantity of Hand Tools and Equipment in two tool boxes.

A Stack-On Tool Chest, 26in x 12in x 12in with Assorted Hand Tools.

A Simark Engineering Adjustable Load Bar, 80in x 2in x 2in.

An RJH Pedestal Mounted Bandfacer, 915mm x 100mm, 3 phase.

A Pullmax Nibbler, 42in throat, 3mm stainless steel capacity, 3 phase with tooling and machine light.

A SCAME Serie ADVANCE 2 Large Industrial Interlocked Switched Socket, 3P+N+T-IP67-32A-6h/346-415V.

A Superwinch UT3000 Electric Winch with controller.

A Record No.6 6in Bench Vice.

A Steel Framed Timber/Steel Top Work Bench, 72in x 36in x 34in h.

A Mobile Welded Steel Heavy Duty Storage Cabinet, 34in x 24in x 32in h.

A Quantity of Assorted Jubilee Clips in 7 lin bins.

2 Sets of 4 Castors, 8in dia x 2in w, 2 braked wheels per set, white.

2 Sets of 4 Castors, 4in dia x 1in w, 2 braked wheels per set, white.

2 Sets of 4 Castors, 8in dia x 1.75in w, 2 braked wheels per set, red.

2 Sets of 4 Castors, 8in dia x 1.75in w, 2 braked wheels per set, red.

2 Sets of 4 Castors: 1-200mm dia x 50mm w, 2 braked, black; 1-150mm dia x 40mm w, black.

A Large Quantity of Assorted Castors.

A Morgan Rushworth BP50-16 Manual Box and Pan Folding Press No.3745289 389, 1-6mm capacity on mobile frame.

A Quantity of Paints, Primers and Thinners with Heavy Duty Welded Steel Inflammables Cabinet, 96in w x 19in dp x 82in h and drip tray (purchaser to clear everything).

2 Retractable Barriers, 1200mm h with Matching Stand, 1200mm h on circular bases.

4 Adjustable Height Trestle Stands with Adjustable Height Roller Stand.

4 Steel Stands on square bases, 1200mm h.

2 Steel Stands, 900mm w x 940mm h with 2 Adjustable Trestle Stands, 970mm w.

2 pairs Heavy Duty Welded Steel Trestle Stands, each 36in w x 31.5in h.

Assorted Paint Spray Equipment including Spray Guns, Pots, Hooks, Trolley.

A Set of artub 6 rise Alloy Platform Stepladders.